fourRoms

Oppo R2001 Stock Firmware, Stock ROM Download

This Oppo R2001 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Walton Android devices.

Stock firmware are mostly needed to either upgrade your Oppo R2001, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Oppo R2001, Stock ROM file which can be used to flash factory OS back to your Oppo R2001.

How to Download Stock Firmware and Flash Oppo R2001 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Oppo R2001 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Oppo R2001 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Oppo R2001 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Oppo R2001 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Oppo R2001 or remove battery from it and re-insert the battery again. Connect your Oppo R2001 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Oppo R2001 to its factory defaults.
NOTE: if you encounter any errors while flashing your Oppo R2001 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Walton android devices, see here: How to Flash Walton Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Oppo R2001

Zopo ZP810 Stock Firmware, Stock ROM Download

This Zopo ZP810 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Walton Android devices.

Stock firmware are mostly needed to either upgrade your Zopo ZP810, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Zopo ZP810, Stock ROM file which can be used to flash factory OS back to your Zopo ZP810.

How to Download Stock Firmware and Flash Zopo ZP810 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Zopo ZP810 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Zopo ZP810 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Zopo ZP810 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Zopo ZP810 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Zopo ZP810 or remove battery from it and re-insert the battery again. Connect your Zopo ZP810 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Zopo ZP810 to its factory defaults.
NOTE: if you encounter any errors while flashing your Zopo ZP810 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Walton android devices, see here: How to Flash Walton Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Zopo ZP810

Walton Primo NX3 Stock Firmware, Stock ROM Download

This Walton Primo NX3 [Android 5.1] Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Walton Android devices.

Stock firmware are mostly needed to either upgrade your Walton Primo NX3 [Android 5.1], downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Walton Primo NX3 [Android 5.1], Stock ROM file which can be used to flash factory OS back to your Walton Primo NX3 [Android 5.1].

How to Download Stock Firmware and Flash Walton Primo NX3 [Android 5.1] with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Walton Primo NX3 [Android 5.1] firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Walton Primo NX3 [Android 5.1] Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Walton Primo NX3 [Android 5.1] stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Walton Primo NX3 [Android 5.1] stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Walton Primo NX3 [Android 5.1] or remove battery from it and re-insert the battery again. Connect your Walton Primo NX3 [Android 5.1] Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Walton Primo NX3 [Android 5.1] to its factory defaults.
NOTE: if you encounter any errors while flashing your Walton Primo NX3 [Android 5.1] using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Walton android devices, see here: How to Flash Walton Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Walton Primo NX3 [Android 5.1]

Oppo R1001 Stock Firmware, Stock ROM Download

This Oppo R1001 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Walton Android devices.

Stock firmware are mostly needed to either upgrade your Oppo R1001, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Oppo R1001, Stock ROM file which can be used to flash factory OS back to your Oppo R1001.

How to Download Stock Firmware and Flash Oppo R1001 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Oppo R1001 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Oppo R1001 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Oppo R1001 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Oppo R1001 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Oppo R1001 or remove battery from it and re-insert the battery again. Connect your Oppo R1001 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Oppo R1001 to its factory defaults.
NOTE: if you encounter any errors while flashing your Oppo R1001 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Walton android devices, see here: How to Flash Walton Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Oppo R1001

Zopo ZP820 Stock Firmware, Stock ROM Download

This Zopo ZP820 [Android 4.4.2] Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Walton Android devices.

Stock firmware are mostly needed to either upgrade your Zopo ZP820 [Android 4.4.2], downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Zopo ZP820 [Android 4.4.2], Stock ROM file which can be used to flash factory OS back to your Zopo ZP820 [Android 4.4.2].

How to Download Stock Firmware and Flash Zopo ZP820 [Android 4.4.2] with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Zopo ZP820 [Android 4.4.2] firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Zopo ZP820 [Android 4.4.2] Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Zopo ZP820 [Android 4.4.2] stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Zopo ZP820 [Android 4.4.2] stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Zopo ZP820 [Android 4.4.2] or remove battery from it and re-insert the battery again. Connect your Zopo ZP820 [Android 4.4.2] Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Zopo ZP820 [Android 4.4.2] to its factory defaults.
NOTE: if you encounter any errors while flashing your Zopo ZP820 [Android 4.4.2] using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Walton android devices, see here: How to Flash Walton Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Zopo ZP820 [Android 4.4.2]

Walton Primo D7 [Android 4.4.2] Stock Firmware, Stock ROM Download

This Walton Primo D7 [Android 4.4.2] Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Walton Android devices.

Stock firmware are mostly needed to either upgrade your Walton Primo D7 [Android 4.4.2], downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Walton Primo D7 [Android 4.4.2], Stock ROM file which can be used to flash factory OS back to your Walton Primo D7 [Android 4.4.2].

How to Download Stock Firmware and Flash Walton Primo D7 [Android 4.4.2] with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Walton Primo D7 [Android 4.4.2] firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Walton Primo D7 [Android 4.4.2] Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Walton Primo D7 [Android 4.4.2] stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Walton Primo D7 [Android 4.4.2] stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Walton Primo D7 [Android 4.4.2] or remove battery from it and re-insert the battery again. Connect your Walton Primo D7 [Android 4.4.2] Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Walton Primo D7 [Android 4.4.2] to its factory defaults.
NOTE: if you encounter any errors while flashing your Walton Primo D7 [Android 4.4.2] using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Walton android devices, see here: How to Flash Walton Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Walton Primo D7 [Android 4.4.2]

Oppo Mirror 3 [3001] Stock Firmware, Stock ROM Download

This Oppo Mirror 3 [3001] Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Walton Android devices.

Stock firmware are mostly needed to either upgrade your Oppo Mirror 3 [3001], downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Oppo Mirror 3 [3001], Stock ROM file which can be used to flash factory OS back to your Oppo Mirror 3 [3001].

How to Download Stock Firmware and Flash Oppo Mirror 3 [3001] with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Oppo Mirror 3 [3001] firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Oppo Mirror 3 [3001] Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Oppo Mirror 3 [3001] stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Oppo Mirror 3 [3001] stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Oppo Mirror 3 [3001] or remove battery from it and re-insert the battery again. Connect your Oppo Mirror 3 [3001] Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Oppo Mirror 3 [3001] to its factory defaults.
NOTE: if you encounter any errors while flashing your Oppo Mirror 3 [3001] using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Walton android devices, see here: How to Flash Walton Android Device: Step by Step with Pictures

Also Read: